Felder G 360 - Specifications; Technical Features Overview; Electrical Connection

14
!
Edgebander
G 330 / G 360 / G 380
Attention! Risk of material damage!
When processing very narrow workpieces, the workpiece may tilt slightly. This means that the workpiece will
not be processed evenly.
*) The minimal workpiece width varies depending on the workpiece length, height and type of surface.
4.3 Technical features
4.3.1 Electrical connection
Technical specifications
Workpiece dimensions
Length (min.) 210 mm
Width (min.)* 70 mm
Workpiece thickness (min./max.) 10–45 mm
Speed 12.000 rpm
Motor 2 x 0,75 kW
Outer diameter of the spindle moulder 60 mm
Bore 25 mm
Spindle moulder width 64 mm
Number of teeth or blades Z 4
Inclination of the spindle moulder teeth not adjustable 30°
4.3.2 Premilling unit (Option)
mains voltage according to specification plate (±10%) 3x 400 V
Mains voltage (Optional) 1x 230 V
Safeguarding (according to data
plate)
Edge thickness (G330 / G 360 / G 380)
0,4 –5 mm
Strip material (W x H) 5 x 49 mm
Workpiece feed speed 8 m/min
Feed motor performance 0,75 kW
Total installed power (according to data plate)
Ø-Extraction connection
1 x120 mm (G 330)
1 x120 mm +2 x 80 mm (G 360 / G 380)