To Next PageTo Next PageWhy does Fellowes Voyager A3 machine speed and noise vary during lamination?
The varying speed and noise in your Fellowes Laminator during lamination is normal. It indicates that the automatic AutoLam feature is adjusting to guarantee optimal laminating conditions for items of varying thicknesses.
Why Ready screen does not come on after a long period in Fellowes Voyager A3 Laminator?
If the ready screen on your Fellowes Laminator doesn't appear after a long period, it could be because the machine is in a hot or humid environment. Move the laminator to a cooler and drier area.
Why is my Fellowes Voyager A3 pouch not sealing completely?
The pouch may not completely seal the item for two reasons. First, the item might be too thick to laminate. In this case, pass it through the machine again. Second, the temperature setting may be incorrect if you are using manual operation. Try using the AutoSense setting, or verify that the pouch thickness is correctly selected and pass the item through the laminator again.
General| Preheating time | 4 min |
|---|---|
| Maximum document thickness | 0.25 mm |
| Standard media sizes | A3 |
Weight and Dimensions| Weight | 10510 g |
|---|---|
| Package depth | 292.00 mm |
| Package width | 730.00 mm |
| Package height | 252.00 mm |
| Package weight | 12060 g |
Company name, address, and official declaration of product compliance with RoHS and other directives.
Lists specific technical standards (EN-60950-1) and EMC directives (EN-55014) for the product.
Provides customer service and help line phone numbers for various international regions.
Details the function and display elements of the LCD user interface for operation and navigation.
Explains the AutoLam feature for automatic, thickness-sensing lamination with step-by-step process.
Details the steps for manual lamination, including setting thickness and operating the machine.
Identifies and describes each physical control button, port, and feature of the laminator unit.
Provides step-by-step instructions for physically setting up the laminator before first use.
Illustrates the step-by-step process for laminating documents using the AutoLam function.
Lists the performance specifications and technical data of the laminator.
Details crucial safety precautions and warnings to prevent hazards during operation.
Describes advanced features like AutoLam, Easi-Access, Auto Reverse, CleanMe, and HeatGuard.
Provides advice on pouch selection, testing, trimming, and optimal lamination practices.
Ensures stable placement, correct power lead connection, and mains supply activation.
Guides through selecting standby, warm-up, inserting pouch, and cooling the laminated item.
Offers customer support resources including website and help line information.
Details manual mode setup, thickness selection, warm-up, and pouch insertion.
Explains how to safely open the laminator for cleaning and mechanism release.
Guides users through the cleaning process prompted by the CleanMe sensor warning.
Shows pictorial sequences for laminating in AutoLam, Manual, and other modes.
Describes the automatic sensor that detects jams and reverses the machine to eject items.
Explains how to adjust the entry guide for optimal document support and to prevent mis-feeds.
Details the integrated carry points for safe and easy movement of the laminator.
Covers service symbol alerts, worldwide warranty terms, and product registration.
Visual guide to Easi-Access, CleanMe maintenance, Auto Reverse, and Help functions.
Addresses issues like no display, poor sealing, jamming, and noise with possible causes and solutions.
Instructions for safely switching off, cooling, and cleaning the exterior of the laminator.
Guidance on proper disposal of the product as Electrical and Electronic Equipment.
