Fender Cyber-Twin - Page 67

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
""
63
#6 &
  
TYPE: PR 393
PART NUMBERS: 022-9000-000 (120V, 60Hz) USA 022-9030-000 (240V, 50Hz) Aust
022-9040-000 (230V, 50Hz) UK 022-9060-000 (230V, 50Hz) Europe
022-9070-000 (100V, 50/60Hz) Japan
POWER REQUIREMENTS: 360W
POWER OUTPUT: 65W per channel (130W total) @ 5% THD
RATED LOAD IMPEDANCE: 8 ohms per channel
SENSITIVITY: adjustable using TRIM control
PREAMP INPUT IMPEDANCE: 900k ohm
EFFECTS LOOP
(mono send, stereo return)
NOMINAL LEVEL: -10dBv / +4dBu switchable
OUTPUT IMPEDANCE: 220 ohm, impedance balanced
INPUT IMPEDANCE: 20k ohm minimum, balanced
SPDIF LINE OUT JACK: RCA jack, digital stereo
XLR OUTPUT JACKS
(stereo / mono switchable)
NOMINAL LEVEL: 0dBv
OUTPUT IMPEDANCE: 300 ohm, impedance balanced
TUBE COMPLEMENT: Groove Tubes, two (2) x 12AX7WA
SPEAKER COMPLEMENT: Celestion, Two (2) x G12T-100 (12-inch, 8 ohm)
FUSES
PRIMARY: F4A 125V for 100V and 120V units, F2A 250V for 230V and 240V units
SECONDARY: digital supply: F2A analog supply: Two (2) x T1A
FOOTSWITCH
FOUR BUTTON: Quick-access key recall functions, 5-pin DIN (MIDI-type) cord
ONE BUTTON: Reverb/Effects Bypass and Vibratone rotor speed select
standard one-button toggle type P/N 099-4055-000 or 00-57172-000
EXPRESSION PEDAL JACK: 1/4-inch (Tip, Sleeve) analog, compatible with any passive
volume pedal, 10k to 250k ohm, (ideal audio taper is 20k 25%)
REVERB/FX BYPASS JACK: 1/4-inch for connection to the included one-button footswitch
MIDI JACKS: IN, OUT, THRU
HEADPHONES JACK: 1/4-inch stereo
DIMENSIONS
HEIGHT: 18
9/32
in (46.4 cm)
WIDTH: 26
1/8
in (66.4 cm)
DEPTH: 12
1/8
in (30.8 cm)
WEIGHT: 55 lb (25 kg)
Product specifications are subject to change without notice.
Instruction Manual P/N: USA 056487revA
, (Europe 057077, Japan 057078)