. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
!"#
Select a parameter to edit -
• Press the AMP key repeatedly to increment through 18 menu items or
• Press and hold the AMP key while rotating the DATA WHEEL in either direction.
Adjustment -
• Rotate the DATA WHEEL to adjust the parameter selected in the step above.
The AMP menu map on the next three pages is your guide to the Preset Edit AMP Mode. Each item is
represented by a pair of rows (unshaded and shaded) as shown below.
Ú
Column 1 — lists 18 AMP design parameters, (see “Select a parameter to edit” above).
Ù
Unshaded Row — lists the parameter name with parameter information to the right.
Ù
Shaded Row — lists the range of parameter values for the menu item to the left, (see “Adjustment” above).
denotes a column with menu items in a continuous loop.
denotes a row with menu items in a continuous loop.
PARAMETER NAME Description and instructions.
Sample Screen
List or range of values.
Value1
I
Value2
I
Value3
I
(continuous menu loop)
6
6
6
6
$03
$03$03
$03
"
[
[[
[
Remember to SAVE your
modifications to a P
LAYER’S LOUNGE
preset or they will be erased when a
new a preset is selected.
The AMP Edit Mode contains 18 menu items that are core components
of an amp’ sdesign. Navigational instructions are below and a map of the
AMP Edit Mode starts on page 22. The chapter ends with “Reverb
–
Defined,” on pages 25 and 26.
*
To Next Page
Loading...
