44
(
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#
8
88
87
77
7,/
,/,/
,/,
,,
,7<
7<7<
7<
"
There are 13 UTILITY parameters, all accessed through the The UTILITY Mode. Nine of these parameters are
used for MIDI functions and the remaining 4 are used for Cyber-Twin system management. UTILITY functions
are global in scope and are not affected by presets. Below are navigational instructions for the UTILITY Mode,
followed by a map of the UTILITY Mode on pages 46 and 47. For more information on the MIDI items in this
Mode, see chapter 7, “MIDI Implementation,” starting on page 54).
!"#%&&
Select a parameter to edit -
• Press the UTILITY key repeatedly to increment through the 13 menu items or
• Press and hold the FX key while rotating the DATA WHEEL in either direction.
Adjustment -
• Rotate the DATA WHEEL to adjust the parameter selected in the step above.
The UTILITY menu map below is your guide to the UTILITY Mode. Each menu item is represented by a pair of
rows (unshaded and shaded) as shown in the example below.
PARAMETER NAME Description, operational instructions,
example screen
Listing or Range of values
Ú
Column 1 — lists the 13 UTILITY parameters, (see “Select a parameter to edit” above).
Ù
Unshaded Row — lists the parameter name with a description to the right.
Ù
Shaded Row — lists the range of parameter values, (see “Adjustment” above).
DEMO MODE
ON (default) – The SAVE key starts the demonstration in PLAY Mode.
OFF
– normal SAVE key functionality, see next parameter.
ON
I
OFF
MEMORY PROTECT
OFF (default) – Normal SAVE key functionality.
ON
– Disables the SAVE key.
OFF
I
ON
SPDIF PATCHING
Amp Line Out – Digital signal with all effects and processing.
Guitar Direct Out
– Digital signal without processing.
Amp Line Out
I
Guitar Direct Out
MIDI CONTINUOUS
CONTROLLER NUMBER
11 (default) – Many CC MIDI expression pedals use 11 as a default.
1-100
(range) – Select number matching the CC pedal.
1–100
*
6
To Next Page
Loading...
