. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Plug in the supplied power cord
after reading, “Important Safety
Instructions” on page 1.
Turn MASTER down
and plug in your guitar.
Switch the POWER ON.
Adjust TRIM so that most of the
Green LEDs stay on and the
Red LED flashes occasionally
while playing guitar. Turn
MASTER to desired level.
Rotate the large DATA WHEEL
to try different Amp Design Pre-
sets. Experiment and play guitar!
To Next Page
Loading...
