125
OPERATION
29.5 Implement diagnosis
function
Text-module
If the implement manufacturer has met the requi-
red conditions, any faults in the attached imple-
ment can be displayed on the operating terminal.
Example:
If the hay loader is decoupled in implement
control mode, the following menu appears.
Operation_Pic_number:1
Text-module
Text-module
The error message can be acknowledged by
pressing the ESC key (on the Vario Terminal).
NOTE:
If the error occurs again: Refer to the imple-
ment manufacturer's operating manual, or
contact the manufacturer'customer service.
A fault message is also displayed
on the multiple display.
The warning lamp also flashes
and a warning tone is sounded.
Fig.308
To Next Page
Loading...
