48
OPERATION
Operation_Pic_number:1
● Indicator (A) appears on the Vario terminal,
indicating active stored engine speed.
Text-module
ETNum-list
7.11 Towing instructions
Operation_Pic_number:1
● Open cover from the cab floor and remove.
● Attach auxiliary device to range control switch
(C).
● Put transmission into neutral position (centre
position).
NOTE:
Do not exceed a towing speed of 10 km/h.
Maximum towing distance 8 km.
Engine speed storing is terminated if one of
following conditions is present.
1.Speed over 18 km/h and foot brake is
operated.
2.Speed over 18 km/h and engine brake is
operated.
3.Call-up buttons are activated again.
4.Hand throttle is operated.
Fig.75
Fig.76
8. Fuel consumption
measurement
(also refer to OPERATION Section 27.4).
8.1 Activating fuel consump-
tion measurement
Operation_Pic_number:1
● Press key (F4). The following sub-menu ap-
pears.
Operation_Pic_number:1
● Press key (F4). The following sub-menu ap-
pears.
Fig.77
Fig.78
To Next Page
Loading...
