FENDT 916 Vario - Filling with Engine Oil; Checking Engine Oil Level

141
CARE AND MAINTENANCE
3.3 Filling with engine oil
Operation_Pic_number:1
● Fill with the required engine oil through filler
neck (A). Ensure cleanliness!
Fig.5
3.4 Checking engine oil level
Operation_Pic_number:1
● Tractor must be on level ground.
● Start the engine and allow the engine on idle
till the warning indication on the multiple dis-
play goes out.
● Check the oil drain plug and filter for leaks.
● Turn off the engine.
● After about 5 minutes, take out the dipstick
(B).
Operation_Pic_number:1
● Wipe dipstick with a clean and lint-free rag.
● Reinsert fully and turn.
● Remove dipstick again.
● Top up if necessary, do not fill above MAX
mark.
Oil level must remain between the MIN and MAX
marks on the dipstick. Do not fill over the MAX
mark.
Text-module
Difference in engine oil quantities
The difference between MIN and MAX marks on
the dipstick represents approx. 5.0 litres.
Fig.6
Fig.7