Page 14
Answering a call.
· When the call button on the Entry Panel/Guard Unit is pressed a call tone is emitted both
from the entry panel and the telephone.
· On receiving a call on the telephone the user has 30 seconds to answer.
· Audio activation: Upon picking up the phone within the established time, communication
will be established with the entry panel that made the call.
· Hang-Up: Hang-up the phone´s receiver to end communication, if not the conversation
will be disconnected after 90 seconds.
· Auto-Start: This function is possible with the panel in the same block; if the panel is in
standby and programmed as “0”; and if there is a conversation channel available, (if it
isn´t available, upon hanging up you will hear a busy tone for 15 seconds). For more
information see the DUOX Panel Settings at www.fermax.com.
Note:
- If the phone is not programmed, the auto-start will not function.
- In case you have made a call from the 00 panel to another home and you are within the waiting
time to pick-up (30 seconds), you can not communicate with the 00 panel.
To Next Page
Loading...
