Fermax DUOX - Available Functions

Page 7
PROGRAMMING THE LOFT DUOX EXTRA TELEPHONE
AVAILABLE FUNCTIONS
CAPACITIES
· Number of terminals per residence: maximum 3. Properly suit consumption to the power
source.
· Number of terminal addresses per sub-block: 99.
· Number of terminal addresses per block: 9999.
· Number of blocks: 99.
· Address for each telephone: 6 decimal digits: 000000 .. 999999. The address 000000 is the
default address and the telephone does not work.
· Number of conversation channels: 2 per BUS. (If the installation only has audio amplifi ers).
· Wiring: 2 non-polarised wires, depending on the wire, distances and terminal charges are
stipulated.
· Number of different optional ringtones: 5.
· Call Volume Regulation.
· Input and output audio volume regulation.
· Maximum conversation time. 90 seconds
· Maximum time to pick up on receiving the call: 30 seconds
· Maximum time to programme the telephone: 2 minutes.
There are two options to program the phone:
a) From the Panel.
b) From the Doorbell.
The functions available on the DUOX Extra telephone are summarised in the following list:
· Call Reception
· Open door
· Call to reception
· Ringtone selection
· Programming from the panel or from the doorbell
· Audio connection upon picking up
· Volume regulation
· Auxiliary F1
· Auxiliary F2 function
· Doorbell
· Light and Doorbell Activation