-30-
Setting monitor time
The monitor time can be changed at any time. It's available to set 30s,40s,50s,1min,2min,3min,
4min,5min,6min,7min,8min,9min,10min.
* 30s is the default monitor time.
1.On main menu page, touch settings icon ->[More...].
2.Select Monitor Time Set item.
3.Touch
/ icon to adjust the levels. Settings will perform immediately.
Enabling/Disabling motion detect function
You can make it possible (ENABLE) or not (DISABLE) to activate motion detect function from
this monitor.
1.On main menu page, touch
settings icon ->[More...].
2.Click Motion Detect Enable setting item,when “
“ symbol is displayed in the frame , the
setting is activated.Click the item again to cancel.
*If this setting item has not been selected, the motion detect function is forbidden, and the Montion detect icon
will not display on main menu page.
To Next Page
Loading...
Need help?
General
