-32-
The restore to default function allows the user to recover the settings to factory setting.
• On main menu page, touch
settings icon ->[About].
• Touch icon, a message of "Restore To Default?" will be asked.
• Touch
icon to start the restore. T
ouch icon to cancel.
* Touch [Logo] icon to enter About page in shortcut.
* If restoring to default is completed,a sound beep will be sent out.
Restoring to default setting
About
Local Address 00.00
Video Standard
AUTO
System Verson 00.01.00
Display Driver 1.0
Font 1.0
UI 1.0
•On main menu page, touch [Logo] icon to enter About page.
•When the screen stay in About page,press UNLOCK button
on front panel and hold for
2 seconds.
• A keypad is shown.
Refer to the followings:
Entering installer setup
00:10 DS-1
About
Local Address 00.00
Video Standard
AUTO
System Verson 00.01.00
Display Driver 1.0
Font 1.0
UI 1.0
INSTALLER SETUP
123
_
? + OK: Help Menu
@ + OK: Address Setting Menu
To Next Page
Loading...
Need help?
General
