SUN P7
41
Cod. 3540I810 - 03/2009 (Rev. 00)
EN
1.5 Operating instructions
Once the burner is installed and correctly adjusted, its operation is fully automatic without requiring any
control by the user. In case of anomalies or no fuel, the burner stops and shuts down. It is advisable to
fill with fuel before it completely finishes, to avoid irregular burner operation.
Make sure the room where the burner is installed is free of flammable materials or objects, corrosive
gases and volatile substances, and that it is not dusty. In fact, dust drawn by the fan sticks to the blades
and reduces the air flow or can obstruct the flame stability disk, affecting its efficiency.
Do not allow unskilled persons or children to tamper with the burner.
Max. power adjustment (parameter u02) depending on the boiler
Power kW
1
14
2
20
3
25
4
30
5
34
Table 3
To Next Page
Loading...
