Festo CMMP-AS User Manual

1. General remarks
10 Festo.P.BE-CMMP-CAM-SW-EN en 1105a
1.3 Documentation overview CMMP-AS
Document
Contents
P.BE-CMMP-AS-3A-HW-
Hardware manual: Assembly and installation of a CMMP-AS-3A-…
P.BE-CMMP-AS-11A-HW-…
Hardware manual: Assembly and installation of a CMMP-AS-11A-…
P.BE−CMM−FHPP−SW−…
General fieldbus description: Control of a CMMP-AS via FHPP
P.BE-CMMP-CO-SW-…
CANopen description: Connection of a CMMP-AS to a CANopen network
P.BE-CMMP-FHPP-DN-SW-…
DeviceNet description: Connection of a CMMP-AS to a DeviceNet network
P.BE-CMMP-FHPP-PB-SW-…
Profibus description: Connection of a CMMP-AS to a Profibus network
P.BE-CMMX-EC-SW-…
EtherCAT for the motor controller CMMP-AS
P.BE-CMMP-AS-PB-S7-CAM-
...
For use of the CMMP-AS in combination with a SIMATIC-S7 controller, there
are special function blocks with its own help file.
Help on FCT software
The FCT framework and the plug-in CMMP-AS each have their own
integrated help files which describe the interface of the parametrisation
software.
Help on the displacement
plan editor (in German and
English)
The displacement plan editor has its own complex help file with information
on operation of the editor and on the motion laws.
Table 1.2 Documentation overview
Note
This overview does not claim to be complete. Depending on the
components and versions used, additional documentation must be
considered.

Festo CMMP-AS Specifications

General

Brand	Festo
Model	CMMP-AS
Category	Controller
Language	English