Need help?Do you have a question about the Festo CMMP-AS-C5-11A-P3-M0 and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Max. output current | 11 A |
| Number of digital inputs | 8 |
| Number of digital outputs | 4 |
| Number of analog inputs | 2 |
| Number of analog outputs | 1 |
| Rated speed | 3000 rpm |
| Rated current | 5.5 A |
| Peak current | 11 A |
| Protection class | IP20 |
| Controller type | Servo drive |
| Nominal voltage DC | 24 V |
| Fieldbus interface | CANopen |
| Operating temperature | 0 ... 40 °C |
| Motor type | Synchronous motor |
| Feedback system | Encoder |
| Ambient temperature | 0 ... 40 °C |
| Operating voltage range DC | 19.2 - 28.8 V DC |
Safety instructions for commissioning, repair, and de-commissioning.
Guidelines for intended application and requirements for product use.
Details on the complete system, its components, and the scope of product delivery.
Visual identification of the motor controller's interfaces and components.
Important notes and procedures for mounting the motor controller, including clearances.
Essential safety precautions for electrical connections and handling.
Mapping of pins to functions for various connection interfaces.
Pin assignment for single-phase and triple-phase voltage supply.
Best practices for wiring to ensure electromagnetic compatibility.
Instructions for connecting the motor, power supply, and PC, along with necessary tools.
Procedures to verify the controller's operating status and indicators after installation.
Overview of the controller's protective functions, monitoring capabilities, and error detection.
Explanation of operating modes, display components, and error message acknowledgement.
Guidelines for product maintenance, and information on repair limitations and disposal.
Comprehensive technical data, including dimensions, environmental conditions, and electrical load voltage.
List of compatible encoder types and their protocols.
To Next Page
