Festo CP-E16 Series - Information on this Manual

Information on this manual
CP I/O modules are available both as PNP (positive-
switching) and NPN (negative-switching). The positive-
switching modules with M12 connection are available in
4-pin and 5-pin forms. The 5-pin design has an earth
connection. This manual contains specific information
on the method of operation, fitting, installation and com-
missioning of the following CP modules:
This manual refers to:
Input modules:
PNP
- CP-E16-M8
- CP-E16-M12x2
- CP-E16-M12x2-5POL
NPN
- CP-E16N-M8
- CP-E16N-M12x2
Output modules:
PNP
- CP-A08-M12
- CP-A08-M12-5POL
NPN
- CP-A08N-M12
Information on further modules as well as basic infor-
mation which must be observed in conjunction with the
higher-order system, can be found in the manuals for
the relevant system.
CP..EA 9901b VII