Contents and general instructions
VII
Festo P.BE−CPX−CEC−E N en 0907NH
· Brakes controlled by the drive controller are alone not
suitable to ensure personal protection!
Secure vertical axes from falling or sliding down when
the compressed air and load voltage are switched off, as
follows:
mechanical locking of the ver tical axis,
external braking/safety catch/clamping device or
sufficient counterbalance of the axis.
· Additional measures are required for use in safety−
related applications; in Europe, for example, the
standards listed under the EC Machinery Directive must
be observed. Without additional measures in
accordance with statutory minimum requirements, the
product is not suitable for use in safety−related sections
of control systems.
Protection from pressurised tubing
Caution
Danger of injury through inappropriate handling of
pressurised tubing!
Undesired movements of the connected actuators and
uncontrolled movements of loose tubing can cause injury
to human beings or damage to property.
· Do not connect, disconnect or open pressurised tubing.
· The tubing must always be vented before removal
(release compressed air).
· Use suitable protective equipment (e.g. safety goggles,
safety shoes, etc.).
To Next Page
Loading...
Need help?
General
