Need help?Do you have a question about the Festo CECX-X-C1 Series and is the answer not in the manual?
General| Digital inputs | 8 |
|---|---|
| Number of Axes | 1 |
| Protection class | IP20 |
| Category | Controller |
| Operating voltage range DC | 24 V |
| Voltage Supply | 24 V DC |
| Storage Temperature | -20 °C to +70 °C |
Provides an overview of supported and unsupported functions and pre-settings in CECX.
Describes network configuration settings for making the control accessible via Ethernet.
Covers the configuration of control components and modules.
Explains how to add hardware modules to the control configuration in CoDeSys.
Explains how station addresses are set via rotary switches and the rules for assigning them.
Covers programs and functions needed for initializing EasyIP communication.
Details functions for communicating with remote stations using the EasyIP protocol.
Outlines programming steps including initialisation and sending/receiving telegrams.
Provides safety warnings for commissioning and programming positioning systems.
To Next Page