Festo CECX-X-C1 Series User Manual

ii
Table of Contents
1 FED/VipWin interface ......................................................................................................................... 1
1.1 Overview ...................................................................................................................................... 1
1.2 Data exchange with the Front End Display (FED) ........................................................................ 1
1.2.1 Basic information on exchanging data with FEDs .......................................................... 1
1.2.2 Exporting PLC variables (symbol configuration and Tag Editor) .................................... 1
1.2.3 Configuring the communication connection (FED Designer).......................................... 5
1.2.4 Importing PLC variables in FED Designer.................................................................... 10
1.3 Exchanging data with VipWin via OPC ...................................................................................... 15
1.3.1 Basic information on exchanging data with VipWin via OPC ....................................... 15
1.3.2 Installing the OPC and the gateway server .................................................................. 19
1.3.3 Configuring the OPC server ......................................................................................... 20
1.3.4 Configuring drivers and importing variables with VipWin ............................................. 23
2 Index .................................................................................................................................................. 29

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English