System manual CECX / Serial option module CECX-S-S4
CECX-II 32-1
32 Serial option module CECX-S-S4
32.1 Introduction
32.1.1 Intended use
The CECX-S-S4 may only be used for the type of use described in the
technical description and only in conjunction with recommended/approved
third-party equipment/installations.
The CECX-S-S4 has been developed, manufactured, tested and docu-
mented in accordance with the appropriate safety standards. Therefore, the
products do not pose any danger to the health of persons or a risk of dam-
age to other property or equipment under normal circumstances, provided
that the instructions and safety precautions relating to the intended use are
properly observed.
32.2 Safety notes
32.2.1 Representation
At various points in this manual you will see notes and precautionary warn-
ings regarding possible hazards. The symbols used have the following
meaning:
!
DANGER!
• indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
!
WARNING!
• indicates a potentially hazardous situation which, if not avoided, can
result in death or serious injury.
!
CAUTION!
• means that if the corresponding safety measures are not taken, a poten-
tially hazardous situation can occur that may result in property injury or
slight bodily injury.
To Next Page
Loading...
Need help?
General
