Festo CECX-X-C1 Series User Manual

System manual CECX / Digital input module CECX-D-16E
CECX-II 15-12
15.8 Technical data
General
Supply voltage I/Os:
24V DC from the front (19.2 V to 30 V, acc. to EN 61131-2)
24 V DC from K Bus
5 V DC from K Bus
Addressing at K-Bus: Via 16-digit address switch, on the side
Connection terminals: Open terminals, grid dimensions 5.08 mm
Max. power consumption K Bus 24 V: 1 W
Max. power consumption K Bus 5 V: 0.4 W
Overvoltage category: II
Equipment class III according to EN 61131-2:2007
Environmental conditions
Operating temperature: +5 °C to +55 °C
Storage temperature: -40 °C to +70 °C
Relative humidity of air: 10 % to 95 % (non condensing)
Vibration resistance: According to EN 61131-2:2007
Shock resistance: According to EN 61131-2:2007
Digital inputs
Number of inputs: 16
Input type: Type 1 (according to EN 61131-2)
Voltage range for "1":
15 V ≤ UH ≤ 30 V
Voltage range for "0":
-3 V ≤ UH ≤ 5 V
Filter: Adjustable: 500 Hz, 50 Hz
Cycle time: 1 ms
Galvanic isolation:
Yes, Electric strength: 707 V with unsewed ground
connection
Status display: Green LED
Interrupt inputs
Number of inputs: 2 (DI0, DI1) of the digital inputs
Input type: Type 1 (according to EN 61131-2)
Voltage range for "1":
15 V ≤ UH ≤ 30 V
Voltage range for "0":
-3 V ≤ UH ≤ 5 V
Filter: Adjustable: 5 kHz, 500 Hz, 50 Hz
Response time of the K-Bus Interrupt:
100 μs at 5 kHz input filter
Galvanic isolation: Yes
Status display: Green LED
Interfaces
System bus-interface: Parallel bus interfaces, plug-in on side
Dimensions:
Footprint:
Module height: 120 mm
Mounting depth: 100 mm
Front panel width: 22.5 mm
Module width:
(incl. K-Bus plug)
32.5 mm
Weight: 130 g

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English