Chapter 5 Audio
Output selection
In this menu, outputs of PO/LO/SPDIF can be switched.
SPDIF out
You can choose between DoP and D2P modes. In D2P mode, PCM will be output originally while
DSD will be converted to PCM output. In DoP mode, it will originally output what you input (The
amplifier should support DSD or there will be noise when you play DSD in DOP mode)
Gain
Set the Gain level of the headphone output to be either High (high volume) or
Low (low volume). Matching different headphones with High or Low will bring you excellent audios.
To Next Page
Loading...
