7
ASSEMBLY INSTRUCTIONS
UNPACKING
! Useful Tip: The Filtrabox is shipped in custom packaging for maximum
protection during transport. Consider keeping the packaging should you wish to
ship the product again.
! Attention: The OXY-Carbon Gas Filter is HEAVY. Each filter weighs
approximately 50lbs each. Take appropriate care and precaution when lifting
the filter.
Remove all the packaging and place all of the parts on the floor. Take inventory of the parts included
with your kit:
1. Main Chassis + Blower Module (Pre-Installed)
2. Dust Pre-Filter
3. HEPA Dust Filter
4. OXY-Carbon Gas Filter
5. Lid Module
6. Threaded Inlet Adapter: designed to fit the with included 4” flex hose
7. Flex Hose: 4” diameter x 8 feet with hose clamp
a. Other hose adapters are optional
8. Power Cord: rated to 15 amps
To Next Page
Loading...