FILTRABOX COMPACTX - Filter Replacement Instructions; Check Filter Warning

13
FILTER REPLACEMENT INSTRUCTIONS
! When the “Check Filter” warning comes on, increasing the “Airflow %” value
WILL NOT increase actual airflow. The “Check Filter” warning indicates that the
“Airflow %” set-point can no longer be achieved despite the fact that the power
applied to the blower by the “AUTO-COMPENSATION FLOW CONTROL” feature
is at maximum value. This is most likely due to airflow blockage in the pre-filter
or HEPA filter from normal usage.
The Filtrabox Compact and Expand systems have 3 types of filters; Pre-Filter, HEPA filter and OXY-
Carbon Filter.
1. Pre-Filter FIL-P-CX-427: Collects fine dust
2. HEPA Filter FIL-P-CX-417: Collects ultra-fine dust
3. OXY-Carbon Filter FIL-G-CX-407: Adsorbs and destroys odor causing gases.
All three filters will need to be independently replaced at some point in time during the course of
normal usage.
“CHECK FILTER” WARNING
! Replacement filters can be purchased from: info@filtrabox.com or call
514.840.9696 ext. 102
The “Check Filter” warning will appear on the screen when either Dust filters (Pre-Filter and/or the
HEPA) filter need replacement.
When the “Check Filter” warning comes on, increasing the “Airflow %” value WILL NOT increase actual
airflow. The “Check Filter” warning indicates that the “Airflow %” set-point can no longer be achieved
despite the fact that the power applied to the blower by the “Dynamic Flow Control” feature is at
maximum value. This is most likely due to airflow blockage in the Pre-filter or HEPA filter from normal
usage.