Fimap Mx Series - Technical Description

6
TECHNICAL DESCRIPTION UM Mx 50Bt Mx 50Bts Mx 55Bt Mx 65Bt
Rated power W 1260 1260 1260 1260
Working width mm 500 500 550 660
Width of rear squeegee mm 755 755 755 948
Work capacity m
2
/h 2250 2250 2500 2970
Brushes (diameter or length)
∅ mm
500 (x1) 110x500 (x2) 285 (x2) 355 (x2)
Brush rotations rpm 240 800 240 225
Pressure on the brushes kg 40 40 40 45
Brush motor V / W 24/560 24/560 24/560 24/560
Type of advance Autom Autom Autom Autom
Maximum gradient 10% 10% 10% 10%
Movement speed km/h 0-5 0-5 0-5 0-5
Suction motor V / W 24/310 24/310 24/310 24/310
Suction vacuum mbar 188 188 188 188
Solution tank PE l 55 55 55 55
Recovery tank PE l 60 60 60 60
Gross weight of the machine ready for use kg 253 253 252 253
Batteries V/Ah 12/150 (x2) 12/150 (x2) 12/150 (x2) 12/150 (x2)
Battery charger * V/A 24/15 24/15 24/15 24/15
Battery compartment dimensions (Length / Height / Width) mm / mm / mm
350x305x360 350x305x360 350x305x360 350x305x360
Machine dimensions (Length / Height / Width) mm / mm / mm
1380x1053x53 1380x1053x53 1380x1053x53 1380x1053x53
Noise level (in compliance with IEC 704/1) dB (A) 59.2 59.2 59.2 59.2
Vibration level m/s
2
1.16 1.16 1.16 1.16
* CB models with built-in battery charger
TECHNICAL DESCRIPTION UM SMx 65Bt SMx 75Bt SMx 60Bts
Rated power W 1360 1360 1800
Working width mm 660 760 600
Width of rear squeegee mm 948 1050 948
Work capacity m
2
/h 3300 3750 3000
Brushes (diameter or length) ∅ mm 345 (x2) 430 (x2) 150X600 (x2)
Brush rotations rpm 240 240 575
Pressure on the brushes kg 30-50 30-50 30-50
Brush motor V / W 24/560 24/560 24/1000
Type of advance
autom autom autom
Maximum gradient %
10% 10% 10%
Movement speed
km/h 0-3 0-3 0-3
Suction motor V / W
24/310 24/310 24/310
Suction vacuum mbar 188 188 188
Solution tank PE l 80 80 80
Recovery tank PE l 90 90 90
Gross weight of the machine ready for use kg 330 335 335
Batteries V / AhC5 6/200 (x4) 6/200 (x4) 6/200 (x4)
Battery charger * V/A 24/25 24/25 24/25
Battery compartment dimensions (Length / Height / Width) mm / mm / 450x305x450
450x305x450 450x305x450
Machine dimensions (Length / Height / Width) mm / mm / 1448x1095x680 1448x1095x890 1448x1095x680
Noise level (in compliance with IEC 704/1) dB (A) 68.7 68.7 68.7
Vibration level m/s
2
1.07 1.07 1.07
* CB models with built-in battery charger