29
16. Transportation and Storage
To prevent the flow meter from damage during the transportation, please keep the
packaging condition as how it was when it was shipped from the factory before arriving
at the installation site. The storage conditions should meet the following:
Appropriate rainproof and damp-proof treatment must be conducted .
Vibration must be reduced and collision with other objects must be prevented during
its transportation.
The storage temperature must be in the range of -20～70℃
The humidity should be lower than 80%
To store the used sensors, clean the tested medium attached on the lining and the
electrode, and avoid oxidation by not exposing it to too much air for a long time.
Outdoor storage may degrade the performance of the flow meter.
To Next Page
Loading...