Firman WH03342 - WH03342_Manual_English _Page_32

Maintenance - Storage
(d) Inspect spark plug for damage and clean with a wire brush before reinstalling. Replace if
damaged.
(e) For spark plug Fl RMAN P /N 330723001 -Adjust the electrode gap to 0.020 - 0.024 in. ( 0.5 - 0.6 mm).
(f) Seat spark plug in position and thread by hand to prevent cross threading.
(g) Tighten plug with provided wrench and put the spark plug boot back on spark plug.
SIDE ELECTllODE
..___,._0.020-0.024 in.
(0.5-0.6mm)
SEALING
WASHER
SPARK PLUG: FIRMAN P/N 330723001
SPARK PLUG: Fl RMAN P/N 330723001
Maintenance Valve Clearance
Intake: 0.004 - 0.006 in. (0.10 - 0.15 mm)
Exhaust: 0.004 - 0.006 in. (0.10 - 0.15 mm)
Muffler and Spark Arrester
~ WARN INC! Contact with muffler area could cause burns resulting in serious injury.
• Do not touch hot parts.
• It is a violation of California Public Resource Code, Section 4442, to use or operate the engine
on any forest-covered, brush-covered, or grass-covered land unless the exhaust system is
equipped with a spark arrester, as defined in Section 4442, maintained in effective working
order. Other states or federal jurisdictions may have similar laws, reference Federal
Regulation 36 CFR Part 261.52.
English 30 Customer Service 1-844-FIRMAN1