First Degree Fluid FR-E216 - Page 19

Bungee wrapping in order:
1. Rope/bungee pulley to upper rear right bungee pulley.
2. Upper rear right to lower rear right and left rear pulleys.
3. Lower left rear to upper left rear pulley.
4. Upper rear left to lower middle left and right pulleys.
5. Middle right pulley to upper right front pulley.
6. Upper front right pulley to lower front right and left pul-
leys.
7. Lower left front pulley to upper left front pulley.
8. Upper left front pulley to tie off point.
Replacing the E-216 bungee shock cord
1
3
Hint: Keep a slight
tension on the
bungee cord when
threading through
the bungee pulleys.
2
4