FISCHER 18092 - Removing and Storing Unit; Service and Manufacturer

40
The following parts are required for this
assembly step.
As described in Step 11, lower the carrying unit
onto the side of the vehicle and, with the aid
of a second person, lift it from the openings in
the guide rails.
Using the included screw hook 6 mm and
wall anchors 6 mm, the loaded carrying unit
can be suspended in a suitable location
(basement or garage wall) with minimum space
requirements.
Step 13
Remove and store the loaded carrying unit
Parts No. Image Quatity
19
Hook
2
20a
4
20b
4
20c
4
7. Service, manufacturer
INTER-UNION Technohandel GmbH
Klaus-von-Klitzing-Straße 2 · 76829 Landau · Germany
Phone (+49 63 41) 2 84-0 · www.inter-union.de
21
PAP
18092_Betriebsanleitung_D_GB_F_IT_PL.indd 40 13.02.15 11:25