FISCHER DUALSCOPE MP0R USB - Switching FP Instrument Models ON;OFF; Switching the...-FP Instrument ON; Switching the Instrument OFF; Auto-Switch-Off

6
2 Switching the “…-FP” instrument models ON / OFF
Note: The on/off operation is different to the other MP0R models!.
Switching the “…-FP” instrument ON
The ON key is the key [OK].
Switch the instrument ON by pressing the key [OK]
Switching the instrument OFF / Auto-Switch-Off
After a certain time, the instrument will switch off automatically (OFF = when instrument’s display is empty)
You can set the period from the last measurement to the automatic OFF from the service mode.
See chapter 14 “Service Menus”, page 27.