FISCHER DUALSCOPE MP0R USB - Service Menus; Access to Service Menus and Setting Service Points

27
14 Service Menus
Access to the service menues and setting of the service points
1. Select the menu icon
using the key [] or [].
2. Press button [OK]. “157” will appear on the display.
3. Set “159” using the key [].
4. Press button [OK]. FREE will be displayed.
5. Select the desired service menu number using [] [] (only service menues # 1, 2, 3, 4 and 10 are active)
6. Press button [OK] repeatedly to select the menu points. Set their current setting using the key [] or [].
7. Press button [OK] to leave the service routine at the end. Note: By pressing [ESC], the service routine can be
left at any time. If you have modified an instrument setting, this will be saved automatically.