30 FISCHERSCOPE
®
X-RAY
Performing Measurements
4.1 Deleting Measurement Readings
To delete a single measurement reading
1. Highlight the measurement reading you want to delete.
2. In the WinFTM main window select Evaluation > Delete Reading.
When you delete a measurement reading, ---- appears in its place in the list of measurement
data and the reading will no longer be included in the evaluation. You can undelete a deleted
reading by selecting Evaluation > Undelete Reading.
If you delete the last reading of the current product, it will be permanently deleted from the
measurement data memory and cannot be recovered.
To delete all measurement readings of the current product
► In the WinFTM main window select Evaluation > Delete All Meas. Data.
To permanently delete individual blocks, already closed
1. In the WinFTM main window select Evaluation > Evaluate Single Block….
The window Block Result appears.
2. Select the block you want to delete.
3. Click Delete Block.
To delete individual measurement readings of blocks, already closed
1. In the WinFTM main window select Evaluation > Evaluate Single Block….
The window Block Result appears.
2. Click Readings.
The window Readings appears.
3. In the list, highlight the reading, you want to delete.
4. Click delete reading.
When you delete a measurement reading, ---- appears in its place in the list of measurement
data and the reading will no longer be included in the evaluation. You can undelete a deleted
reading by clicking delete reading again.
If you delete the last reading of the current product, it will be permanently deleted from the
measurement data memory and cannot be recovered.
To Next Page