Handling of Measurement Data and Statistical Evaluations Statistics
70 FISCHERSCOPE
®
X-RAY
As described under “Evaluate block” above, you can select and
then delete a desired block. However, you can also delete a block
in the list display mode:
To do this, select the block title “Block no. N” (where N is the block
number) and click the icon [DEL] or the command “Delete reading
Del.” from the “Evaluation” menu. The block will be deleted and in
its place appears the line “Block no. N deleted”.
Undeleting a block
However, the deleted block is not permanently lost but can be
restored: Undeleting a block To undelete a block, use the left
mouse button to select the line “Block no. N deleted” and click the
command “Undelete reading” from the “Evaluation” menu. The
block will appear again with all its single readings.
9.7 Statistics
Appendix “Statistics”
The appendix to this operator’s manual includes a compilation of
the characteristic statistical quantities that underlie the
mathematical processes of the WinFTM Software.
To Next Page
Loading...