FISCHERSCOPE
®
X-RAY 7
Safety Information
1 Safety Information
When used as intended, the FISCHERSCOPE
®
X-RAY is safe in its operation. When you use the
instrument as intended and observe the safety information, the instrument does not pose any risks.
Please read and follow these instructions and observe the safety information. Please also note the
generally applicable regulations concerning safety and accident prevention.
1.1 Warning notices used
1.2 Intended Use
The FISCHERSCOPE X-RAY is used for coating thicknesses measurements and for materials analy-
sis. The measurement method conforms to DIN 50 987, ASTM B568 and EN ISO 3497.
The specifications of the instrument and of the accessories are described in the data sheet in the
Attachment to this Operators Manual.
Only accessories recommended and approved by FISCHER may be connected to this instrument.
Modifications, repairs, maintenance and service work on the FISCHERSCOPE X-RAY and its acces-
sories must be performed by authorized FISCHER service personnel only.
There is no other intended use. The risk for damage from unintended use lies solely with the user.
ATTENTION
Indicates a risk that can lead to damage or destruction of the product.
CAUTION
Indicates a risk that can lead to light or moderate injuries.
WARNING
Indicates a risk that can lead to death or serious injuries.
DANGER
Indicates a risk that will lead immediately to death or serious injuries.
To Next Page
Loading...