Fisher & Paykel CLEANSMART 7 Series User Manual

36
This action will reset the washer to the
default settings, exit Option Adjustment
mode and restart the washer in normal
operating mode.
CHANGING PRE-SET OPTIONS
2
Factory Reset
EOC Beeps
Wash Temp
OOB Recovery
Touch MORE or LESS to increase or
decrease the number of beeps, or for no
beeps to sound at the end of the cycle.
1
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Enter Option Adjustment mode, refer to the
‘Option Adjustment mode’ for instructions
Select the
EASY IRON cycle.
2
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
The display will show . Touch for
3seconds to reset your washer to its factory
settings.
Factory reset
You can reset your washer to the default settings it left the factory with following steps.
To reset your washer to its factory settings:
Touch
to exit if you do not wish to reset
your washer. To save changes and exit from
the Option Adjustment mode at any time (ie
to return to normal operating mode), touch
.
3

Fisher & Paykel CLEANSMART 7 Series Specifications

General

Brand	Fisher & Paykel
Model	CLEANSMART 7 Series
Category	Washer
Language	English