Fisher & Paykel CLEANSMART 7 Series User Manual

35
End of cycle beeps
The beeps signalling the end of the cycle can be increased or decreased. The default
setting is 5beeps.
To modify the number of beeps sounding at the end of the cycle:
CHANGING PRE-SET OPTIONS
1
1
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Factory Reset
EOC Beeps
Wash Temp
OOB Recovery
Enter Option Adjustment mode, refer to the
‘Option Adjustment mode’ for instructions.
Select the
HANDWASH cycle.
Enter Option Adjustment mode, refer to the
‘Option Adjustment mode’ for instructions.
Select the
SHEETS cycle.
2
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Touch MORE to turn
AUTOMATIC RECOVERY or .
Automatic recovery ON
Your washer will try to automatically correct the out of balance load. It will fill with water
and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery routine:

Fisher & Paykel CLEANSMART 7 Series Specifications

General

Brand	Fisher & Paykel
Model	CLEANSMART 7 Series
Category	Washer
Language	English