Fisher & Paykel WH8060P1 - Err 7:03

479646
39
13.1.6 Err 7:03
The motor control module has detected excessive current in the motor or electronic switches.
Measure / check the motor harness, connectors and
motor for discontinuity and shorts by taking the
resistance measurement between phases at P171 of
the motor control module. Nominal resistance should
be 28 ohms.
Replace the motor
control module.
Remove the rotor and stator; check the stator brass
bridge terminal point and associated harness for water,
mechanical damage or corrosion.
Replace the stator.
Replace the motor control module.
N
Y
N
Y
Error message: Wash Motor over Current
Trouble shooting: