EasyManua.ls Logo

FJDynamics FJNBD-2.5RD - User Manual

FJDynamics FJNBD-2.5RD
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FJDynamics Autosteering Kit
Software User Manual
FJNBD-2.5RD
©FJ Dynamics Technology Co., Ltd. All rights reserved.
©FJ Dynamics Technology Co., Ltd. All rights reserved.
Question and Answer IconNeed help?

Do you have a question about the FJDynamics FJNBD-2.5RD and is the answer not in the manual?

Summary

Safety and Operational Guidelines

Operator Requirements

Lists conditions and restrictions for operating the autosteering kit.

Operation Environment

Details safe operating locations and rules to follow during use.

Operation Rules

Lists rules to follow during driving or operation.

Pre-operation Checks

Outlines essential checks before and during operation.

Other Operational Notes

Provides additional notes and precautions for using the kit.

Chapter I About This Document

Document Purpose

Explains the manual's objective.

Technical Support Information

Provides details on how to get technical assistance.

Chapter II Product Overview

Introduction and Main Components

Provides an overview of the autosteering kit and its key parts.

Antenna Installation Precautions

Offers safety guidelines for installing antennas to prevent damage or injury.

Control Terminal Hardware Interfaces

Details the physical ports and connectors on the control terminal.

Chapter III Software Operation Instructions

Workflow Overview

Provides a summary of the software operation workflow.

Initial Commissioning Process

Details the steps for initial setup and configuration of the kit.

Home Screen Interface

Describes the main interfaces in Fast and Advanced modes.

Connecting to RTK

Details the steps for establishing an RTK connection.

Setting Vehicle Parameters

Covers setting vehicle parameters for optimal performance.

Calibrating the Angle Sensor

Details the process for calibrating the angle sensor.

Vehicle Calibration Procedure

Explains the steps to calibrate the vehicle for accurate operation.

Preparatory Operations in Fast Mode

Outlines steps for preparing operation in Fast Mode.

Preparatory Operations in Advanced Mode

Outlines steps for preparing operation in Advanced Mode.

Operation Execution and Settings

Explains how to start, manage, and configure operations.

Operation Modes and Field Marking

Covers switching modes, shifting guidance lines, and marking fields.

Chapter IV FAQs and Troubleshooting

Frequently Asked Questions

Provides answers to common issues and problems encountered during operation.

Chapter V Hardware and Specifications

Control Terminal Specifications

Lists the technical details and features of the main control terminal unit.

Sensor and Antenna Specifications

Details specifications for GNSS, 4G, Radio antennas, and IMU.

Angle Sensor and Steering Motor Specifications

Provides technical data for the angle sensor and electric steering motor.

FJDynamics FJNBD-2.5RD Specifications

General IconGeneral
Steering Motor TypeBrushless DC motor
Steering Accuracy±2.5 cm
Power Consumption≤50W
Protection LevelIP65
Communication InterfaceCAN, RS232
CompatibilityUniversal
InstallationPlug and play, easy installation
Operating Voltage12V/24V
Assisted Driving FunctionsAuto-steering
Working Temperature-20°C to 60°C
Humidity5% to 95% (non-condensing)
Compatible Vehicle TypesTractors, Harvesters, Sprayers

Related product manuals