Water values to be observed for the operation of the Sideflow Clean Pro
Water values At least Maximum
pH value 8,2 9,5
Conductivity S/cm 10 1.000
°dH 0,3 7
4.1. Home page
Figure 4.1 Languages
After the device has been connected to the 230V mains, the language selection
appears as the start page.
• If the status LED on the screen lights up green continuously, the control system has
fully booted up.
• On this page you can choose between 8 different languages.
18 We reserve the right to change the design and technical specifications of our products.
To Next Page
Loading...
