• Heating and cooling systems The device is designed for larger systems, for a
connection size of 1 1/2" (see section "9 Technical data" on page 48)
• Further tasks In addition to initial filling and processing, the device performs the
following additional tasks:
- Magnetic filtration
- Fine filtering
• Service The device may only be operated and maintained by persons who are
sufficiently qualified and authorized.
• Safety devices The device may only be operated if the safety devices are intact.
Safety devices must be checked regularly to ensure they are in correct condition and
functioning properly.
• Maintenance and repair General inspection and cleaning work must be carried out
by trained persons. Maintenance, servicing and repair work may only be carried out
by qualified specialists.
2.3. Improper use
The device may only be used for the purposes described in the section “2.2 Intended
use” used in the ways described on page 8 Any deviating
Use may pose a risk to persons and property and is prohibited.
Improper uses include:
• Use for purposes other than filtering water
• Operation in potentially explosive areas in accordance with the ATEX Directive
• Operation with defective or missing safety devices
• Maintenance and repair in the absence of safety equipment without increased safety
measures
• Operation by unqualified or insufficiently qualified personnel
2.4. Dangers during transport and installation
2.4.1. Transportation
During transport and installation of the device, dangers may arise from heavy and
tipping parts. To avoid this, please observe the following safety instructions:
• Transport the device without impact or shock.
• During transport, secure the device using suitable means to prevent it from tipping
over or falling over. Only remove any transport safety devices after installation.
9
Sideflow Clean Pro
> Safety instructions
ENG
To Next Page
Loading...
