Finder User Guide | www.flashforge.com 0086-0579-82273989
22
˄3-6˅On the top foam sheet, you can see one Quick Start Guide and a tool bag( USB
stick*1, leveling knob*1, Allen wrenches*3, stamping wrench*1, unclog tool*1, and
screwdriver*1).
˄3-7˅Remove the tape on for fixing the flat cable
.
(3-8) Cut off four ribbons that used for fixing the guide rod. Then slide the extruder to
36
37
38
To Next Page
Loading...
