This guide is only applicable to Flashforge Foto 8.9s 3D printer
Foto 8.9s
Quick Start Guide
EN/CN-A03
Please put on gloves while using photopolymer resin to avoid
direct contact with hands.
To ensure the printing quality, please don’t open the light shield
unless it’s necessary.
Unused photopolymer resin needs to be stored in a dark, dry ,
and cool place.
Please clean the finished model with anhydrous alcohol.
Please ensure that the platform is installed correctly and no
items before operating to avoid damaging the LCD screen.
1.
2.
3.
4.
5.
WARNING
To Next Page
Need help?
General
