Need help?Do you have a question about the FLASHFORGE 3D PRINTER Guider IIS Series and is the answer not in the manual?
Guidelines for safe work area conditions and electrical connections.
Precautions for user safety and important warnings for printer operation.
Detailed explanation of the printer's touch screen menus and options.
How to modify temperature and printing speed during operation.
Using preheat functions and exploring the 'Tools' menu options.
Managing Polar Cloud, filament checks, and light bar controls.
Steps for Polar Cloud setup and extruder calibration.
Adjusting light brightness, performing factory resets, and updating firmware.
Guides on installing the filament cartridge and spool.
Connecting the power supply and turning the printer on.
Detailed instructions for safely removing filament from the extruder.
Starting the printer's automatic build plate leveling process.
Guidance on using knobs to set the correct nozzle-to-plate distance.
Connecting the printer via USB and accessing print functions.
Connecting the printer to a PC using WiFi (AP and STA modes).
Steps for connecting via Ethernet and disconnecting the printer.
Steps to convert a 3D model into a printable Gcode file.
Setting up print job parameters like material, supports, and resolution.
Direct printing from a computer connected via USB cable.
Printing directly from a computer connected via WiFi.
Transferring and printing files directly from a USB drive.
Direct printing from a computer connected via Ethernet cable.
Contact details and methods for obtaining technical support.
General| Brand | FLASHFORGE 3D PRINTER |
|---|---|
| Model | Guider IIS Series |
| Category | 3D Printers |
| Language | English |
To Next Page