Guider IIS series User Guide | www.flashforge.com
Step 3：Reboot you Guider Ⅱ and wait for 4-5 seconds, then you can see the
update process bar. When the update finishes, it will go back to the main
Step 4：Tap [Tools]--[About] to check whether the updated version is right.
When the computer and printer are in connection, click [Tools]--[On Board
Preferences]
, you can check the printer name.
When the computer and printer are in connection state, click
[Tools]--[Machine information]
, you can check the machine type, machine
② Help Contents: Click [Help]--[Help Contents], you can read the help
③ Check for Updates: Click [Help]--[Check for Update] to detect the
available updates online.
④
About FlashPrint:
Click
[Help]--[About FlashPrint]
, the software
information box will pop up. The contents include the current software version
and copyright information.
To Next Page
Loading...
