Guider IIS series User Guide | www.flashforge.com
Method 2:
Press the shortcut
Ctrl+D
Select the object and delete the object through the following two methods:
Method 1: Click [Edit]--[Delete]
Method 2: Press the shortcut Delete
⑦
Auto Layout All
Click [Edit]--[Auto Layout All] after loading one or more than one models, all
models will be placed automatically as automatic placement rule.
Click [Edit]--[Repair Models] to repair models.
Click [Edit]--[Supports] to enter supports setting interface.
You can connect the Guider Ⅱ S with your PC via USB cable or Wi-Fi or
Ethernet Cable. Note: The machine icon on the bottom right displays the
connection status: Connected
Method 1：Connect Via USB Cable
a. Connect your Guider IIS series with your PC via an USB cable.
b. Turn on your Guider IIS series and start FlashPrint.
c. Click [Print]--[Connect Machine], then select USB in the [Connection
Mode] option and select machine you want to connect in [Select Machine]
To Next Page
Loading...
