Guider IIS series User Guide | www.flashforge.com
Rotate the mouse wheel to enlarge or shrink the build plate.
Allow users to view the object on the build plate. Six views are under the view
menu, that is, bottom view, top view, front view, back view, left view and right
Method 1: Click the the [View] button, there are six views in the drop- down
Method 2:
Click the the
[Look]
icon
on the left, click it again and a
submenu will appear with six views for selecting.
Allow users to reset views by the following two methods:
Method 1: Click the [View] menu and select [Home View]
Method 2:
Click the [
View
] button on the left, click it again and you will see the
viewing options, you can click [Reset].
Click [View]--[Show Model Outline], it will highlight the yellow border of the
Click [View]--[Show Steep Overhang]. When the intersection angle between
the model surface and horizontal line is within the overhang threshold value,
To Next Page
Loading...
