FLASHFORGE 3D PRINTER Guider IIS Series - Safety and Precautions; Work Environment and Electrical Safety

Guider IIS series User Guide | www.flashforge.com
Notice
Safety Notice
! Notices
: Read all the instructions in the manual and familiarize yourself with
the FlashForge Guider IIS series User Guide before setting-up and using.
Failure to comply with the warning and instructions may result in individual
injury, fire, equipment damage or property damage.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE
BELOW ALL THE TIME.
· Work Environment Safety
① Keep your work place tidy.
② Do not operate Guider IIS series in the presence of flammable liquids,
gases or dust.
③ Keep Guider IIS out of children and untrained people’ reach.
· Electrical Safety
① Always use the Guider IIS with a properly grounded outlet. Do not refit
Guider IIS plug.
② Do not use Guider IIS in damp or wet locations. Do not expose Guider IIS
to burning sun.
③ In case of device damage, please use the power supply provided by
FlashForge.
④ Avoid using the device during an thunderstorm.
⑤ In case of uncertain accident, please unplug the device if you do not use it