FLASHFORGE 3D PRINTER Guider IIS Series - Loading and Managing 3 D Models

Guider IIS series User Guide | www.flashforge.com
Load files.
Enter the support edit mode
Print it directly with your Guider IIS series or export to your
USB Stick
View FlashPrint home screen from one of six viewing angles
Move model around on XY-plane; shift+click to move along Z
axis
Turn and rotate your model
Scale the size of your object
Cut model into several parts
6.2.3 Loading
You can load a model file or Gcode file into your FlashPrint by the following six
methods:
Method 1: Click the [Load] icon on the main interface. Then select
the object file.