Finder User Guide | www.flashforge.com 0086-0579-82273989
58
Chapter 7:Basic Printing
This chapter will provide a step-by-step guide on turning a 3D modelinto a physical
reality. Before proceeding, it is recommended that you’d bettergo over prior chapters on
loading/unloading filament, leveling the build platform, and the functions and
capabilities of FlashPrint.
7.1 Generate a Gcode
(7-1)Double-click the icon of Flashprint to start the software.
7-1
(7-2)Click
[Print]--[Machine Type] to select Flashforge Finder
7-2
(7-3)Click the [
Load] icon to load a .stl model file and the object will display on the
build area.
7-3
˄7-4˅Click
[Edit]--[Surface to Platform] to make your model perfectly positioned
34
To Next Page
Loading...
